Rotix 2 Probe Weld Frame Chain Scanner
CEG013-BCEG013-CCEG013-DCEG013-ECEG013-FCEG013-GCEG013-HCEG013-I Two Probe Cantilever Scanning

Rotix – 2 Probe Weld Frame Scanner

From: $USD 7,830.00

The Rotix – CEG012 is a manual chain scanner designed to provide encoded probe position of two phased array probes circumferentially around tubes and pipes. A double wheel chain is used to straddle the weld. This allows the scanner frame to be centered on the weld to reduce wandering and reduce the width of the scanner. The Rotix chain can be adapted from 10.2 cm – 96.5 cm (4 in – 38 in) OD using multiple combinations of short and long links.

Clear selection
Standard Delivery: 2-3 weeks
SKU: CEG012. Category: .

Product Description

Pipe Range, Circumferential: 10.2 cm – 96.5 cm (4 in – 38 in)
Encoder Resolution: 9.05 counts/mm (230.0 counts/inch)
Probe Holding Capacity: 2 phased array wedges
Encoder Cable Length: 5 m (16.4 ft)1
Inspection Surface: Ferrous or non-ferrous materials


Adjustable Chain: Using two link lengths and an adjustable buckle, a pipe of any size can be inspected from 10.2 cm – 96.5 cm (4 in – 38 in) diameter. Quick release links are designed for simple and efficient setup.
Double Wheel Chain: The double wheel chain straddles the weld to allow the scanner to be centered on the weld. This alleviates scanner wandering and reduces the width of the scanner.
Brake System: A brake is provided to lock the location of the scanner in a required position.
Wheels: Wheels of the scanner and chain links are coated with urethane to reduce the effects of foreign debris obstructing scanner travel. Urethane also eliminates slippage during vertical applications.
Spring Loaded Encoder: The spring loaded encoder ensures encoder contact with the scan surface at all times. The encoder output is fully compatible with all standard instruments (5V DC TTL encoder compatible with all major UT instruments).
Probe Holders: An integrated latch allows easy probe center spacing adjustment and scanner installation. Due to its modular design most major types of phased array wedges can be accommodated.
Irrigation Kit: The included irrigation kit contains the necessary hoses, fittings, tubing, etc, required to connect a couplant pump to the probe(s) being carried by the scanner.
Tools: Tools for all adjustment and manipulation of your scanner and components are included with the system.
Warranty: 3 year limited warranty on all products.

Scanner Clearance

Clearance: 10.2 cm (4 in)

Size & Weight

Scanner Height: 10.53 cm (4.15 in)
Scanner Width: 38.49 cm (15.15 in)
Scanner Length: 17.50 cm (6.90 in)
Scanner Weight: 1.27 kg (2.8 lb)3

Rotix Measurements

Probe Holder Specifications

Phased Array Probe Holder

Arm Style Width (W) Length (L)
Standard 13 mm (0.513 in) – 57.6 mm (2.266 in) 48.5 mm (1.910 in)
Long 13 mm (0.513 in) – 55 mm (2.165 in) 65.3 mm (2.570 in)

Pivot Button Style

Button Style Pivot Hole Size Wedge Type Hex Size
01 8.0 mm (0.315 in) Olympus PA 9.53 mm (3/8 in) PH0011-01
02 5.0 mm (0.197 in) Olympus TOFD, Olympus A27 DMA 9.53 mm (3/8 in) PH0011-02
03 2.7 mm (0.106 in) Sonatest DAAH PH 9.53 mm (3/8 in) PH0011-03
04 9.5mm (0.375 in) 11.1 mm (7/16 in) PH0011-04
06 3.0mm (0.118 in) 9.53 mm (3/8 in) PH0011-06
07 2.3 mm (0.09 in) 9.53 mm (3/8 in) Pivot-Buttons.psd_0002_07
08 Conical Head 9.53 mm (3/8 in) PH0011-08
09 5 mm (0.197 in) Internal Zetec PA/TOFD, Phoenix TOFD 9.53 mm (3/8 in) PH0011-09

Environmental Specifications

Operating Environment: -20°C (-4°F) to 50°C (122°F)
Environmental Sealing: Dust tight, water tight (not submersible)

  1. Custom cable lengths are available.
  2. Approximate shipping weight of standard kit contents

Kit Contents

Item Quantity*
Rotix frame with 40 cm (15.7 in) frame bar
Double wheel chain links (Long, short, buckle, etc)
Over-the-top link
Trailing Encoder, 5 m (16.4 ft) cable length
Slip joint phased array probe holders 2
Long probe holder arm set 2
4 mm ID irrigation kit (7/16 in Quick Connect)
Probe holder spare parts kit
Cable clips 2
3 mm hex tool
Wrench for pivot button adjustment
User manual
Setup chart
Rugged carrying case

* Quantity of one (1) unless otherwise stated.