Reduced Width Rotix – 2 Probe
CEG018-BCEG018-HCEG018-GCEG018-FCEG018-BCEG018-ECEG018-DCEG018-CCEG018-JCEG018-Ihttps://www.youtube.com/watch?v=pzcaqDZBRl8Reduced Width Chain Scanner

Rotix – Reduced Width Scanner

From: $USD 7,110.00

The Rotix  – CEG017 Reduced Width Scanner features an encoded probe-holding link, along with double wheel links used in Jireh’s weld frame chain scanning systems. This reduced width link can be used to facilitate inspection in applications where scanners with minimal footprint are required (i.e. coating/insulation removal near a girth weld, elbows, flanges, etc.). Single probe scanning requires a width of only 10 cm (3.94 in)2, and dual probe scanning can be achieved with a width of only 25 cm (9.84 in)2.

Clear selection
Standard Delivery: 2-3 weeks
SKU: CEG017. Category: .

Product Description

Pipe Range, Circumferential: 10.2 cm (4 in) to 96.5 cm (38 in)
Encoder Resolution: 16.32 counts/mm (414.5 counts/inch)
Probe Holding Capacity: 2 Phased Array Wedges
Encoder Cable Length: 5 m (16.4 ft)1
Inspection Surface: Ferrous or non-ferrous material

Features

Minimal Footprint: Single probe scanning requires a width of only 10 cm2 (3.94 in), and dual probe scanning can be achieved with a width of only 25 cm2 (9.84 in).
Adjustable Chain: Any pipe size from 10.2 cm – 96.5 cm (4 in – 38 in) diameter can be inspected due to the easily removed link system. Links are designed a quick release to easily be added or removed.
Double Wheel Chain: A double wheel chain is used to straddle the weld during two probe operations. This allows the reduced width link to be centered on the weld to reduce wandering and reduce the width of the scanner.
4 Probe Scanning: With the addition of a Rotix – 2 probe reduced width add-on kit, the scanner will accommodate four probes.
Wheels: The wheels of the Rotix are coated with urethane to reduce the effects of foreign debris obstructing the motion of the scanner. Magnetic wheels can also be added.
Built-in Encoder: An encoder is integrated into the reduced width link. The encoder output is fully compatible with all standard instruments.
Probe Holders: Included vertical probe holders are compatible with most major types of phased array wedges.
Irrigation Kit: The included irrigation kit contains the necessary hoses, fittings, tubing, etc, required to connect a couplant pump to the probe(s) being carried by the scanner.
Tools: Tools for all adjustment and manipulation of the scanner and components are included with this system.
Warranty: 3 year limited warranty on all products.

Scanner Clearance

Clearance: 9 cm (3.54 in)

Reduced Width Radial Clearance


 Size & Weight

Link Height: 11.96 cm (4.71 in)
Link Width: 8.07 cm (3.18 in)
Link  Length: 21.81 cm (8.59 in)2
Cart Weight: 0.64 kg (1.4 lb)3
Shipping weight: 6.62 kg (14.6 lb)4

Reduced Width DimensionsReduced Width Dimensions


Probe Holder Specifications

Phased Array Probe Holder

Arm Style Width (W) Length (L)
Standard 13 mm (0.513 in) – 57.6 mm (2.266 in) 48.5 mm (1.910 in)
Long 13 mm (0.513 in) – 55 mm (2.165 in) 65.3 mm (2.570 in)

Pivot Button Style

Button Style Pivot Hole Size Wedge Type Hex Size
01 8.0 mm (0.315 in) Olympus PA 9.53 mm (3/8 in) PH0011-01
02 5.0 mm (0.197 in) Olympus TOFD, Olympus A27 DMA 9.53 mm (3/8 in) PH0011-02
03 2.7 mm (0.106 in) Sonatest DAAH PH 9.53 mm (3/8 in) PH0011-03
04 9.5mm (0.375 in) 11.1 mm (7/16 in) PH0011-04
06 3.0mm (0.118 in) 9.53 mm (3/8 in) PH0011-06
07 2.3 mm (0.09 in) 9.53 mm (3/8 in) Pivot-Buttons.psd_0002_07
08 Conical Head 9.53 mm (3/8 in) PH0011-08
09 5 mm (0.197 in) Internal Zetec PA/TOFD, Phoenix TOFD 9.53 mm (3/8 in) PH0011-09

Environmental Specifications

Operating Environment: -20°C (-4°F) to 50°C (122°F)
Environmental Sealing: Dust tight, water tight (not submersible)

  1. Custom umbilical lengths are available.
  2. Does not factor additional width due to wedge size.
  3. Link weight does not including cabling.
  4. Approximate shipping weight of standard kit contents.

Kit Contents

Item Quantity*
Reduced width link with integrated encoder, 5 m (16.4 ft) encoder cable
Double wheel chain links (Long, short, buckle, etc)
10 cm (3.9 in) frame bar
25 cm (9.8in) frame bar
Vertical phased array probe holders 2
Probe holder spare parts kit
4 mm ID irrigation kit (7/16 in Quick Connect)
3 mm hex driver
Wrench for pivot button adjustment
Rotix sizing chart
User manual
Rugged carrying case

* Quantity of one (1) unless otherwise stated.

Video

Support

Feedback