Need help building your part number? Use the example below as a reference.
The order chart above is used to build a Rotix CEG004 kit. This method applies to all of Jireh’s scanner kits.
Example: CEG004-24-B-01-02. This kit would start with a basic CEG004. The ‘24‘ indicated that the maximum pipe diameter (OD) that can be scanned with this kit is 24″. The ‘B‘ indicates that the umbilical will be able to connect to an Olympus OmniScan or Harfang X32 based on the ‘Umbilical Style’ chart. The primary probe holder pivot button style is ‘01‘ meaning that the primary set of probe holders will have 8mm buttons. The secondary probe holder pivot button style is ‘02‘ meaning that the secondary set of probe holders will have 5mm buttons.
Umbilical Style
| Umbilical | Company/Instrument |
| B | Olympus OmniScan |
| C | Olympus Focus LT |
| D | Olympus OmniScan MX2 |
| E | Olympus Epoch XT |
| N | Olympus UMB1 Umbilical (single axis encoder output) |
| F | AGR TD Focus Scan |
| F | AGR TD Handy Scan |
| F | AGR TD Scan |
| F | AGR TD Pocket Scan |
| B | Zetec ZIRCON |
| Umbilical | Company/Instrument |
| Q | Zetec DYNARAY |
| C | Zetec Z-Scan |
| P | Sonatest VEO |
| A | Flying Leads |
| J | Jireh Breakout Bell* |
| K | AIS NP3 Nanopulser |
| L | US Ultratek PCIUT3100T |
| M | Scantech Analyst |
| B | Harfang X32 |
| G | Sonotron Isonic |
Note: Additional instrumentation may be supported. Please contact Jireh if the instrumentation you are using is not on the list.
* See Umbilicals and Cables Section for Jireh Breakout Bell specifications.
Pivot Button Style
| Button Style | Pivot Hole Size | Hex Size |
| 01 | 8.0mm (0.315") | 9.53mm (3/8") |
| 02 | 5.0mm (0.197") | 9.53mm (3/8") |
| 03 | 2.7mm (0.106") | 9.53mm (3/8") |
| 04 | 9.5mm (0.375") | 11.1mm (7/16") |
| 06 | 3.0mm (0.118") | 9.53mm (3/8") |
| 07 | 2.3mm (0.090") | 9.53mm (3/8") |
| 08 | Conical Head | 9.53mm (3/8") |